System Science and Engineering Design †MyAssignmenthelp.com

Question: Discuss about the System Science and Engineering Design. Answer: Introduction It is a fact that good and environment friendly practices cannot be denied is in accordance with the most effective economic practice. Various measures and aspects regarding the minimization of the consumption of energy and the water consumption will have enhanced and increased benefits for the nature and environment. This will also result in making substantial savings in terms of the financial costs throughout the entire lifetime of any infrastructure. The costs of the consumption of water are most probably to increase at a higher rate in comparison to the RPI in the future years as the natural resources continue to get reduced. Moreover, there has been increase in the environmental regulations and controls in respect to utility companies. According to the previous assignment, it has been mentioned that the notion of the environment friendly buildings have been promoted for many years (Balters Steinert, 2015). It has also been observed that many individuals have misunderstandings and misconceptions regarding the green buildings which are basically the environment friendly buildings. Most of the people perceive the green buildings to be infrastructures like buildings to be surrounded by many trees. It can also be stated that the some people consider the green buildings to have positive implications on the environment. These aspects have been very clearly stated in the previous assignment in context of the actual meaning of the environment friendly buildings. The exact meaning of the environment friendly buildings has been very elaborately depicted in the previous assignment. It has been stated that the environment friendly buildings are required to be built with the objective of preservance of the natural environment surrounding the buildings (Di Martino, et al., 2014). The environment friendly buildings are also built with the intention of no occurrence of any disruptions to the natural resources such as water, land, and energy present around the infrastructure. The promotion of a very healthy and clean environment for all the people that are involved in the construction of the environment friendly buildings has been depicted as one of the objectives of the project. The case of the environment friendly building in the previous assignment which is named The Crystal has been taken into analysis. The building is stated to be situated in London and designed by Siemens in 2012. The main reason due to which the construction of this building was on debate was regarding the need of sustainable living and development (Filby, 2013). The infrastructure was observed to function as an effective platform in the form of a museum that facilitated and operated as a platform for the education about urban living. It also served as a venue for the conduction of discussion about the ways in which individuals live in urban areas like cities and the types of struggles that these people have to op through on a daily basis. The Crystal also served as a platform for the assisting the demonstration of the manner in which green houses assist in providing a balance in the quality of environment, life and economy (Geddie, 2013). Preliminary design The preliminary design phase of any type of system engineering design refers to the development and meaning of the contextual system and needs of the structuring of environment friendly buildings. It was observed that the preliminary design of the environment friendly buildings occurs right after the analysis of the feasibility and appraisals of the options and post briefing of the construction of environment friendly buildings. Preliminary design is stated in accordance to the environment friendly buildings in regards to the initiation of the design and the completion of the overall project (Inagaki, et al., 2013). The description of the manner and methods along with the stages of the construction project will be conducted in regards to the completion of the construction of the environment friendly buildings. The structuring of the environment friendly buildings right from the preliminary stage of design starts with the outlining of the issues for which the project proposal has been structured (Keating, 2014). The construction of the buildings is a very common thing in all around the world and the fact cannot be denied that the construction of such infrastructure is increasing at a rapid rate. This has been causing many varieties of negative effects on the environment at large. It was further noted that Siemens has recognized these issues and materialized the decision regarding the construction of the environment friendly buildings that is otherwise known as green building which can resolve such issues. The costs associated with the construction of the green buildings are also structured in the preliminary design phase. It has been observed that various methods of the preliminary design of the structuring of the green buildings arise from the need of the infrastructure in regards to stopping the degradation of the environment (Kehoe, et al., 2015). The specification that are integrated in the construction of the environment friendly buildings integrates the technical, operational, performance and support characteristics of the infrastructure project. Such aspects associate to the design phase of the construction at the sub-system level. The benefits of the construction project of the environment friendly buildings in the context to the cost effectiveness and the impacts on the environment are described in the preliminary phase of the structuring of the environment friendly buildings (Lee, Hwang Yoe, 2013). Detailed design and development The detailed design and development phase of the cycle of life in the structuring of the detailed design and development phase have been very well analyzed and depicted to be a continuation process if the improvement of the approaches of construction of the buildings. It has also been observed that the phase of detailed design and development in regards to the construction of the green buildings integrates the developments of the needs of the designs of all the factors at the individual construction level. It also integrates the required activities which are related to the environmental and technological aspects of the obtainment of the objectives of the construction of the green buildings or environment friendly buildings (Romanovsky Thomas, 2013). Various elements and the activities related to the integration of the concerns of the environment along with the engineering and science of construction have been conducted in the detailed design and development phase of the construction project. At this stage of the construction of the environment friendly buildings, alterations on the format and other components of the construction project are integrated in this stage (Xie, et al., 2014). The evaluation of this phase is carried out in the previous assignment that is focused around the analysis of the Crystal that also includes different steps like architecture, specifications, preparations of the schedule and strategies of planning in regards to the construction project and the costs estimation. It also includes the strategies and procurement of the completion of the different phases (Sayyar, et al., 2014). It is further observed that the features and components of the Crystal was assessed in regards to the energy generation by utilizing the natural light, solar panel, reduction in the carbon emission, controls on the heating of the infrastructure and the facilitation of the hot water to the whole building by the optimal use of the solar thermal energy. The technical feasibility has been incorporated in the assignment which refers to the technical features related to the construction of the green building like the storage of the water from the rain by the approach of rain water harvesting, energy generation and effective use of the natural light in the building (Seruggia Montoliu, 2014). The components lie the incorporation of the equipments such as solar panels for the electricity generation, the construction of the underground reservoirs for the storage of water, use of the ground source of heat pumps have been referred in the assignment. The specification regarding the availability of the machinery and technical components which are needed according to the aims of the construction project of environment friendly buildings integrated with the technical features is very clearly stated (Seruggia Montoliu, 2014). The ADDIE Model is very much appropriate in the analysis in this context. It can be denoted as a generic process which is suitable for the individuals who strategies in structuring of environment friendly buildings. The phases of the ADDIE model relates to the analysis, design, development, implementation, and evaluation which is very much in resonance with the stages of the construction of the environment friendly buildings (Seruggia Montoliu, 2014). System test, evaluation validation, and optimization These aspects relates to the assessments of the green buildings in environmental and technical aspects. It also integrates the maintenance of the green buildings that are stated in regards to long-term functionality of the environment friendly buildings (Shi, et al., 2015). The testing and evaluation along with the validation process denotes to the assessment of the technical performance along with the ensuring of the specification and functionality of the features (Tapia Elwany, 2014). The human factors play a significant role on the structuring of the environment friendly buildings. People need to be aware and accept the concept of the environment friendly buildings with realistic perception (Shugart, 2013). The functional analysis divides the entire structuring of the constructing system in various functional elements. The ways in which the elements are needed to be conducted are described. This aspect would integrate the usage of the solar panels for the generation of electricity and the structuring of the underground reservoirs for the rain water storage and the minimization of the carbon emission by the utilization of the natural fuels instead of fossil fuels. The requirements of the function and the system of the green buildings have been observed to be crucial. Conclusion The significance of the design process and the conduction of the different stages of the project design that in this scenario is the structuring of the green buildings are elaborated in this assignment. The notion of the environment friendly buildings can provide the resolution to different issue of environment is elaborate din the paper. References Balters, S. and Steinert, M., 2015. Capturing emotion reactivity through physiology measurement as a foundation for affective engineering in engineering design science and engineering practices.Journal of Intelligent Manufacturing, pp.1-23. Di Martino, S.F., Faulkner, R.G., Hogg, S.C., Vujic, S. and Tassa, O., 2014. Characterisation of microstructure and creep properties of alloy 617 for high-temperature applications.Materials Science and Engineering: A,619, pp.77-86. Filby, G. ed., 2013.Spreadsheets in science and engineering. Springer Science Business Media. Geddie, K., 2013. The transnational ties that bind: relationship considerations for graduating international science and engineering research students.Population, Space and Place,19(2), pp.196-208. Inagaki, M., Kang, F., Toyoda, M. and Konno, H., 2013.Advanced materials science and engineering of carbon. Butterworth-Heinemann. Keating, C.B., 2014, June. Governance implications for meeting challenges in the system of systems engineering field. InSystem of Systems Engineering (SOSE), 2014 9th International Conference on(pp. 154-159). IEEE. Kehoe, B., Patil, S., Abbeel, P. and Goldberg, K., 2015. A survey of research on cloud robotics and automation.IEEE Transactions on automation science and engineering,12(2), pp.398-409. Lee, M., Hwang, J. and Yoe, H., 2013, December. Agricultural production system based on iot. InComputational Science and Engineering (CSE), 2013 IEEE 16th International Conference on(pp. 833-837). IEEE. Romanovsky, A. and Thomas, M., 2013.Industrial deployment of system engineering methods. Heidelberg: Springer. Sayyar, S., Cornock, R., Murray, E., Beirne, S., Officer, D.L. and Wallace, G.G., 2014. Extrusion printed graphene/polycaprolactone/composites for tissue engineering. InMaterials Science Forum(Vol. 773, pp. 496-502). Trans Tech Publications. Seruggia, D. and Montoliu, L., 2014. The new CRISPRCas system: RNA-guided genome engineering to efficiently produce any desired genetic alteration in animals.Transgenic research,23(5), pp.707-716. Shenderova, O.A. and McGuire, G.E., 2015. Science and engineering of nanodiamond particle surfaces for biological applications.Biointerphases,10(3), p.030802. Shi, K., Lian, C., Bai, Z., Zhao, S. and Liu, H., 2015. Dissipative particle dynamics study of the water/benzene/caprolactam system in the absence or presence of non-ionic surfactants.Chemical Engineering Science,122, pp.185-196. Shugart, M.S., 2013. Between Science and Engineering: Reflections on the APSA Presidential Task Force on Political Science, Electoral Rules, and Democratic Governance.Perspectives on Politics,11(3), p.818. Tapia, G. and Elwany, A., 2014. A review on process monitoring and control in metal-based additive manufacturing.Journal of Manufacturing Science and Engineering,136(6), p.060801. Xie, Z.J., Ren, Y.Q., Zhou, W.H., Yang, J.R., Shang, C.J. and Misra, R.D.K., 2014. Stability of retained austenite in multi-phase microstructure during austempering and its effect on the ductility of a low carbon steel.Materials Science and Engineering: A,603, pp.69-75.